Product Directory Display Products, Data Sheets Home

Time Code Display, Model 6275A, decodes and displays an applied IRIG B Serial Time Code as Days, Hours, Minutes and Seconds on 1 inch high seven segment LED display. If there is a loss of time code signal input, the unit automatically switches to an internal clock. The displayed colons flash at a 1Hz rate to alert the operator when the time code signal is absent.  The unit includes a front panel intensity adjustment.

The 6275A is housed in a 19 inch wide rack mounted enclosure, 1.75 inches high and 1.5 inches deep and is powered by 12VDC or 115VAC line with included external power supply

Get Data Sheet



Time Code Display,  Model 6075B
is a two function unit that decodes and displays the IRIG B Serial Time Code and also will operate as a countdown clock. Major features include:
  • Decodes NASA 36 or IRIG B Serial Time Code, selectable.
  • User selectable time code synchronized Count Down Clock function.
  • Nine digit time display, 2.3" high LED characters.
  • Internal TCXO clock maintains timing in the event of a loss of serial time code input.
  • Serial RS-232 control input.
  • Non-volatile memory retains set-up in the event of power failure.
  • Offset feature allows different time zones to be displayed from common time code input.
  • Modified IRIG Count Down codes available as an option.

The unit displays the time as Days, Hours, Minutes and Seconds on a four inch LED display.  The 6475 displays the applied time code as DDD:HH:MM:SS, or in the absence of an applied signal, the internal clock.  The display intensity is user adjustable via a rear panel potentiometer. If there is a loss of serial time code input, the displayed colons flash at a 1Hz rate to alert the operator that the unit is operating on the internal clock.
 

A Windows® based GUI is included, which provides remote control and configuration setup of the unit via the RS-232 port

 

 

 


 

The 6075B is housed in an aluminum enclosure, 21.25 inches wide, 4.0 inches high, 1.75 inches deep (not including mounting bracket).  The unit may be mounted on shelf, wall or ceiling using the included mounting bracket.  All controls and connectors are on the rear panel.

Also available is a larger version, Model 6475, which has 4 inch high characters.  That unit is 39.75 inches wide, 6.5 inches high, and 2 inches deep (not including mounting bracket). Other than character height and overall size this unit is identical to the 6075B.

The 6475 is powered by 12VDC or 115VAC line with included power supply

.Get Data Sheet


Model 6062Time Code Monitor Model 6062, Hand held, battery powered unit that provides a means of verifying the demodulated IRIG B serial time code and event outputs of LED camera drivers also known as Timing Light Generators. The unit will display time derived from both serrated and non-serrated DC IRIG formats. An automatic power shut down feature prevents battery drain when no signal is applied for a period of time.

The 6062 is housed in a high impact plastic case and contains a 16 digit LCD time display and event indicator. A retractable rear mounted tilt foot bar is included. It is powered by four AA batteries and includes a battery eliminator pack. All controls, connectors and indicators, with the exception of the external power jack, are on the front panel. The external power jack is on the rear edge.

Also available is the Model 6062A, which accepts both AC and DC IRIG signals.

Get Data Sheet


Airborne Time Code Display, Model 6135B, decodes and displays an applied IRIG B Serial Time Code signal.  The unit displays the time as Hours, Minutes and Seconds on an LED display.  The 6135B displays the applied time code, or in the absence of an applied signal, the internal clock. Display is six digits, HH:MM:SS. The display intensity is user adjustable via a front panel selector switch. If there is a loss of serial time code input, the displayed colons flash at a 1Hz rate to alert the operator that the unit is operating on the internal clock.

Major features include:

  • Standard DZUS® rail mount per MS-25212
  • IRIG B time code decoder.
  • Front panel intensity adjustment.
  • Internal clock, maintains time in absence of IRIG time code signal.
  • Meets “Safety of Flight” requirements.
  • Powered by 15 to 36 volts DC, 2.0 watts.
  • Replacement for discontinued Datum 9520-647.
  • Also available in F16 fighter aircraft compliant configuration replacing the Datum 9520-647 (ITS Model 6135B-17)

The 6135B is housed in an aluminum enclosure, 5.75 inches wide, 1.5 inches high and 5 inches deep (not including rear panel connectors) designed for aircraft mounting.  Power and the serial time code signal are applied via two rear panel connectors.

The 6135B is powered by 15 to 36 VDC.  Fully complies with "Safety of Flight” requirements.

Get Data Sheet


 

Copyright © 2012, Instrumentation Technology Systems
For more Information Email: sales@itsamerica.com